DNF Controls 4000CL-MAV-PBIO 사용자 설명서 - 페이지 17

{카테고리_이름} DNF Controls 4000CL-MAV-PBIO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DNF Controls 4000CL-MAV-PBIO 20 페이지. 250 clip fast access system with peripheral bus interface option for sony mav-555 video servers
DNF Controls 4000CL-MAV-PBIO에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

페이지 인쇄

16. FUNCTION TABLE

Function

GOTO ENTERED

[SHIFT] + [RECUE]

TIME

FFWD

[FFWD]

JOG

[JOG]

LAST CUE

[LAST CUE]

NEXT CUE

[NEXT CUE]

RECORD

[REC]

REWIND

[RWD]

SHUTTLE

[SHUTTLE]

SLOMO

[SLOMO]

SLO-MO SPEED

[SHIFT] + [SLOMO]

PRESET

STOP

[STOP]

GANG VTRs

[SHIFT] + [VTR #1]

[SHIFT] + [VTR #2]

[SHIFT] + [VTR #3]

[SHIFT] + [VTR #4]

TIME MODE

[TIME MODE]

SELECT

17 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option

Key Press

Search the VTR to the manually entered time.

Use the ST300 numeric keypad.

Press [ENTER] or [RECUE].

Press and HOLD to shuttle. Release key to stop. Set WIND

Speed in MENU.

Select JOG mode and enable Wheel.

Step to the previous Cue Point Location.

Step to the next Cue Point Location.

Places VTR into the Record mode selected by RECORD

MODE in the SETUP MENU.

Press [RECORD] or [RECORD] + [PLAY].

Press and HOLD to shuttle. Release key to stop. Set WIND

Speed in MENU.

Select SHUTTLE mode and enable Wheel.

Press [SLOMO] to slo-mo the VTR. Turn the Wheel (or move

the T-Bar if available) to change the play speed. Press

SLOMO] to STILL frame.

Press any transport key to exit SLOMO.

For WHEEL ONLY: Press [SHIFT] + [SLOMO] to preset the

slo-mo speed. Turn the Wheel to select desired speed. Press

[ESC] or any transport key to exit.

Press once to STILL frame VTR.

Press again to put VTR into STOP mode.

Press and Hold [SHIFT]. Then when lights go out, press VTR

keys to include in the gang. Press [SHIFT] to escape gang

setup mode. Flashing LED indicates VTR or HDD being

monitored for status.

Press to toggle between Timecode (TC), VITC (VT) or Tape

Timer (TM) display modes.

Description