Blue Bird TIRRENO 12V 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Blue Bird TIRRENO 12V에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blue Bird TIRRENO 12V 8 페이지.

페이지 인쇄



After using the shaker, disconnect the electric cables and store TIRRENO in a dry and cool place

4) TROUBLESHOOTING - CASE HISTORY

TROUBLE

The machine does not start

The machine stops at the

minimum effort

5) MAINTENANCE

Before any cleaning/maintenance action the operator has to absolutely disconnect the electric cables.

Maintenance has to be made by skilled personnel only, with the sole use of original spare parts.

In order to assure a high performance for a long time operator has to make a simple maintenance work as

mentioned in the following table.

POS.

NOTE: Do not use air compressors

NOTE: Use molybdenum disulfide lubricant

Replacement of carbon rods

Carbon rods can be easily replaced when damaged or worn. Follow the steps below:

a) disconnect the electric cable

b) unscrew the nut

c) take off the rod

d) plug in the new rod

e) fasten again the screw again with the nut

NOTE: The inside mechanisms of TIRRENO are protected for a lifetime with a special grease. DO

NOT OPEN THE MACHINE UPPER PART. Any tampering will invalidate the manufacturer warranty.

PROBABLE CAUSE

The switch is not set to ON

The cables are not connected

The battery poles are inverted

The battery is discharged

COMPONENT

Carbon rods

Power supply cables

and connectors

TIRRENO

Piston

SOLUTION

Repeat the switching on steps

Check the connections

Replace the fuse in

the box of the power supply

cable

Connect the battery properly

Recharge the battery

ACTION

Check if assembled

correctly

Check if undamaged

Cleaning after use

Grease through the

proper opening

FREQUENCY

Daily

2/3 times a day