Blue Coat AV210 빠른 시작 매뉴얼

{카테고리_이름} Blue Coat AV210에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blue Coat AV210 8 페이지.

This Blue Coat Quick Start Guide describes how to rack-mount the Blue Coat AV210 and explains the initial

configuration methods.

1. Unpack the Blue Coat Appliance

The Blue Coat AV210 is shipped with the following components:

• Blue Coat AV210 appliance

• Side rack-mounting kit

• Packet: Software license sticker

card/software license

agreement

2. Record the Setup Information

For initial configuration, you must have the following information:

❐

IP address, subnet mask, gateway, and DNS server to be assigned

❐

Administration access names and passwords to be assigned to this Blue Coat AV210 appliance

3. Power Up the Blue Coat Appliance

There is no power switch on the Blue Coat AV210. Plug the power adapter into the DC IN socket on the

rear of the appliance.

The Blue Coat AV210 takes approximately two minutes to boot up. During that time, the Power LED

glows solid amber. After boot up, the LED flashes amber and green, indicating the Blue Coat AV210 is

ready for initial configuration.

Document Number: 231-03007 Rev E.0 06/09

AV210 Quick Start Guide

• AC power cord

• Wall mount bracket and screws • Skid-proof rubber pads (4)

• Serial cable

Power LED

• AC power adapter

• Packet: Safety/Conformity