Dobinsons BU59-3706 설치 매뉴얼 - 페이지 3

{카테고리_이름} Dobinsons BU59-3706에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dobinsons BU59-3706 10 페이지. Bullbar for toyota hilux revo 2015 on

11. Remove the front plastic bumper support by

sliding sideways to release from the clips and

remove the steel bumper mount. Keep the

original bolts for fitment of the bullbar

bracket. Remove the small plastic air dams

also.

12. Remove the lower bash plate and keep aside

for re-fitment.

13. Remove the 2 outer bumper support brackets.

Dobinsons Springs and Suspension

14. Install the inner and outer bullbar bracket

supports to each side of the chassis using the

M12 fine bolts with washers for the rear 2

outer mounting points. The longer bolts pass

through the chassis through both brackets.

Use a washer on each side. Leave bolts loose

for now.

15. Install the bullbar bracket using the nuts, bolts

and washers supplied. Use the original bolts