AKONA Exuma Jumper 소유자 매뉴얼 - 페이지 7

{카테고리_이름} AKONA Exuma Jumper에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AKONA Exuma Jumper 16 페이지. Water trampoline

A S S E M B L Y I N S T R U C T I O N S

UNPACK THE CONTENTS

Lay the Exuma on a flat surface. Make sure there are no sharp objects under the product

that might puncture the tube.

INFLATE THE TUBE

Locate the valve of the Exuma and unscrew the cap.

To lock open valve, depress stem and rotate ¼ turn clockwise. To close valve, depress

stem and rotate ¼ turn counter-clockwise. The valve stem should be in the depressed

position while inflating. Replace cap on valve after inflation to ensure air tight seal.

NOTE:

A special inflation adapter is included with this product. If you are using the AKONA

Sports High Speed Inflator, simply lock the adapter onto the end of the inflation hose

and insert into the valve body.

Turn ¼ turn to lock in place.

ATTENTION: This inflation adaptor will automatically open the valve when inserted and will

close the valve when removed. You do not need to manually open/close the valve when using

this special adaptor.

Inflate until the tube is firm and resistant to pressure. Your hand should create minimal

depression when pushed against the tube. Replace cap to ensure an air tight seal.

O W N E R ' S M A N U A L