AKONA IBIZA 소유자 매뉴얼 - 페이지 7

{카테고리_이름} AKONA IBIZA에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AKONA IBIZA 12 페이지. Bounce platform

A S S E M B L Y I N S T R U C T I O N S

NOTE:

A special inflation adapter is included with this product. If you are using the AKONA

Sports High Speed Inflator, simply lock the adapter onto the end of the inflation hose

and insert into the valve body.

Turn ¼ turn to lock in place.

ATTENTION: This inflation adaptor will automatically open the valve when inserted and will

close the valve when removed. You do not need to manually open/close the valve when using

this special adaptor.

Inflate until the tube is firm and resistant to pressure. Your hand should create minimal

depression when pushed against the tube. Replace cap to ensure an air tight seal.

Do not exceed 2.5 PSI (0,17 bar) if filling with compressed air. Excessive pressure can

cause the tube to rupture with potentially damaging force to eyes, ears, skin and limbs.

Use of an air compressor over-inflation can rupture the tube beyond repair, thus voiding

Air pressure within the tube can fluctuate depending on air and water temperatures.

It may be necessary to increase or decrease the air pressure in your product

accordingly. To avoid damage on extremely hot days it maybe necessary to check

and release the air pressure from your product throughout the day. A fully inflated

product on warm land will lose some of its pressure when placed in cold water.

C A U T I O N !

DO NOT OVER-INFLATE.

the warranty.

O W N E R ' S M A N U A L