DockCraft DS300 조립, 설치, 설정 및 작동 지침 - 페이지 8
{카테고리_이름} DockCraft DS300에 대한 조립, 설치, 설정 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DockCraft DS300 12 페이지.
페이지 인쇄Installation Procedure for Your - Series 100 Docksider
Now that the Mounts are in place; Mount the Cradle Assembly to them.
If the distance to the water from the dock decking is:
10 to 22 inches: insert clevis pin in the 2nd hole of the pivot lateral into the top Slot of the mounting
bracket.
17 to 29 inches: insert clevis pin in the 2nd hole of the pivot lateral into the bottom Slot of the mounting
bracket
20 to 31 inches: insert clevis pin in the 4th hole of the pivot lateral into the top Slot of the mounting bracket
25 to 37 inches: insert clevis pin in 4th hole of the pivot lateral into the bottom Slot of the mounting
bracket
Adjust if required - up or down - based on your specific watercraft or if your water level changes
significantly throughout the season.
To "Lock" the Brackets and Pivot Laterals together insert "Locking Pin" on both sides of unit.
If Clevis Pin with Circular Retaining Ring in Hole 2 or 4 of Pivot Lateral is seated in the Top Slot.
Kayak Storage Rack to Water Level Adjustment:
Setting for Water Level to Decking
20 to 31 Inches
Bottom Slot
Bottom Hole
nd
Insert 2
Clevis Pin through hole in bracket
and secure with
"R" Retaining Clip on opposite side.
Page 8 of 12
4th Hole
Top Slot