Etac 2Move 매뉴얼 - 페이지 5

{카테고리_이름} Etac 2Move에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Etac 2Move 8 페이지.

Use

Location

2Move incl. nylon cover and/or tube foil is positioned un-

der the client by rolling the the client slightly away from

the direction of movement, preferably using an absorbent

sheet. 2Move is positioned under the client after which

the client is rolled back.

2Move shall only be laid a few cm under the client. Posi-

tion the client's head and legs carefully onto the board. If

possible, it is helpful to cross the client's legs so that the

leg that is closest to the board is lowest with the other leg

crossed over it.

Use

By applying a little pressure to the shoulder and hip, the

carer can move the client over onto the other bed. If a

sheet is used, it is a good idea to position 2Move under-

neath the sheet. Positioning then takes place as described

above, but using the sheet to pull on (Illustrations 1 and 2).

2Move can easily be removed by sliding 2Move out from

under the client: The carer places one hand over the board

and the other under it. Then, the carer eases the nylon

material away with the upper hand while pulling towards

herself with the lower hand.

2Move can also be removed by first removing the board

from the cover and then removing the cover by pulling on

the down part.