DocuPen DocuPen RC800 Series 운영 매뉴얼 - 페이지 13

{카테고리_이름} DocuPen DocuPen RC800 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DocuPen DocuPen RC800 Series 16 페이지. Portable scanner

DocuPen Roller Calibration Procedure

f your scanned image looks disproportionally stretched (or shrunk) then you need to

calibrate the rollers.

As a rule, color calibration must be done first, before roller calibration

Note:

Your DocuPen must be

Calibration procedure

4. You will be prompted to turn the DocuPen ON. Press the Power On button on your

DocuPen and Click OK in the Dialog window.

Note:

Your DocuPen memory will be erased!

DocuPen Operation Manual 24

CONNECTED

to your PC before starting the

1. Open the DocuPen Scanner Control window.

Click on Options and select Calibration.

2. In the Calibration

Dialog window that

appears click on the Auto

Calibration button

3. In the Calibration Setup window that

appears please Calibrate Roller and click on

OK.

DocuPen Roller Calibration Procedure (continued)

After the memory has been erased the Calibration scanning window will appear.

Disconnect

the DocuPen and scan the Roller Calibration sheet. For optimal

results we recommend to perform the Roller Calibration in Mono Mode B/W by

Resolution 200dpi. The

Red

LED on the DocuPen will start flashing indicating that the

DocuPen is in calibration mode. Position the DocuPen on top of the Calibration sheet

and glide it over the image from top to bottom. Stop the movement at the bottom of the

Calibration sheet.

6. The DocuPen will now save the Calibration image into memory. After the calibration

image is saved into DocuPen's memory,

click OK in the Calibration scanning window. You will be prompted to turn the

DocuPen ON.

yellow N/A

You should see the

successfully calibrated your DocuPen!

7. Finally, click Upload Values button in the Calibration result window to send the

calibration result to the DocuPen. Turn ON the scanner and click OK.

DocuPen Operation Manual 25

connect

the DocuPen to your computer and