Etac Hi-Loo 매뉴얼 - 페이지 2
{카테고리_이름} Etac Hi-Loo에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Etac Hi-Loo 2 페이지. Toilet seat raiser with brackets
Etac Hi-Loo에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지), 매뉴얼 (4 페이지), 매뉴얼 (12 페이지), 매뉴얼 (4 페이지), 매뉴얼 (3 페이지)
페이지 인쇄
en
English
General
The Etac Hi-Loo with brackets is a toilet seat raiser
designed for use on the toilet bowl. It has been
developed to facilitate toilet use by persons who
have restricted mobility and who need a raised toilet
seat.
Installation and use ...........................
1. Undo the four fixing screws. The screws should be
loosened only. Do not remove completely!
2. Move the four brackets towards the outside of
the seat. Tighten the screws so that it still will be
possible to turn the brackets one more click.
3. Place the Hi-Loo on the toilet bowl and adjust it
until there is contact at the front of the bowl.
4. Turn the rear and front brackets at the side
towards the bowl.
5. Slowly lift the Hi-Loo away from the bowl. Turn all
four brackets one click inwards. Now tighten the
screws. Important: The brackets must remain in
position!
6. Attach the Hi-Loo to the bowl, front brackets
first. Then use downward pressure to secure the
rest of the Hi-Loo to the bowl. Check it is securely
attached.
Maintenance and safety ....................
1. Clean/disinfect the chair with normal non-abrasive
cleaning agents with a pH value of between 5-9,
or with 70% disinfectant solution. Rinse and dry.
The product is otherwise maintenance-free.
2. The product can withstand cleaning in a
sterilizer at 85°C for 3 minutes. This applies for
reconditioning.
3. Maximum user weight (see technical data).
4. A defective product must not be used.
5. Heated chair can cause burns.
The materials used are corrosion-resistant.
The materials used are resistant to all general
disinfectants.
Guarantee, service life
5-year guarantee against material and manufacturing
defects. For terms and conditions, see www.etac.
com.
Service life 10 years. For complete information
regarding the service life of the product, see www.
etac.com.
Technical data ....................................
Figure A
Figure B
Figure C
2