DOD LS430W 하드웨어 설치 매뉴얼
{카테고리_이름} DOD LS430W에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOD LS430W 2 페이지.
DOD LS430W에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 사용자 설명서 (19 페이지)
Thank you for purchasing Our company product,
please following the instruction to use the device
correctly.
Our company products are made of top materials to
provide the best quality product with the best image
quality to all customers.
1、Recording in a car without film on windshield can ensure the
best image recorded.
2
、
Please keep the windshield clean to prevent bad influence
on image quality.
3 If windshield wiper can't clean the windshield, please
、
replace it with a new one, or the image quality in the rainy
day will be influenced.
4 Image quality will be better while recording in a sunny day, but
、
1、Indicator
10 Micro-SD Card Slot
、
please note in backlight position the image will be darker, it's
2、Microphone
11、USB/Vehicle Charger Power
the normal reaction while image sensor face the light straightly.
3、UP
Supply Port
4、DOWN
12、AV Output Jack
、
5
In order to present a better video and audio quality, we suggest
5、MENU Key
13、Power switch
using the following player software: Storm video, Windows
6、MODE/Mute Mode
14、Video Recording/Camera/Confirm
Media Player,QuickTime Player.
(Long press)
15、HDMI Output Jack
7、SOS Emergency File Lock
16、Reset key
6、Though this product passes temperature cycling test, in order to
8、EV Adjustment
17、LED lamp
ensure a longer working life, during the hot summer days, please
9、2.7-Inch TFT Display Screen
18、Speaker
store the device in cool place while not working.
1、For the users whose vehicle cigarette lighter keeps power
supplying after the engine stopped, please unplug the car
charger before leaving the vehicle.
2、Please use Class 6 or above Micro SD card.
3、Once the file be protected, the file will not be deleted by loop
recording. The device can protect up to 10 files, if the 11th file be
protected, the oldest protected file will be turned to unprotected
file which will be deleted by looping recording.
4、The speed stamp in the video is the result of GPS signal computing,
and will have slight deviation, please take the speed information
on DOD Player as priority.
1、Please insert the memor y card into the SD Card Slot with
the specified direction, and then use the bracket to fix the
device inside the car.
2、When using the bracket, please choose the position
carefully. Do not place the device in the position that
blocks the driver's sight or affects the normal work of the
1、Insert the memory card
airbags.
2、Connect the car charger into the vehicle
cigarette lighter and the device.
3、If there is any splotch, fingerprints or other kinds of
3、Start the vehicle.
smudginess inside or outside on the windshield, please
4、The device be turned on, and start
wipe clean it before proceeding the installation.
recording automatically.
1
2
3
4
5
6
7
8
After stopped recording, press MENU to enter the recording settings.
Recording Settings
WDR:
Toggle on the WDR function.
13
9
14
Resolution Set the recording resolution.
:
15
Exposure:Set the exposure value.
16
White Balance: Adjust for ambient light.
17
Record Audio:Toggle on or off the sound recording function.
18
Date Stamp:Toggle on or off the data stamp function.
Loop recording:Set the video length in recording cycle mode, or
10
11
12
toggle off record cycle function.
Gsensor:Set the sensitivity level of the G-sensor file protection .
Motion Detection:Toggle on or off the motion detection recording
function.
Plate stamp: can display the registration number on the video.
Driver fatigue warning: Switch on/off Driver fatigue warning function.
GPS logger: Toggle on of off the GPS logger function.
Speed Display: Set the length of time before the full screen speed
display activating.
GPS speeding warning: Switch on/off GPS speeding warning
1、WDR works all time
10、Memory Card icon
function.
2、Recording image
11、Recording time
Time Zone: Please set your local time zone in accordance with the
3、Recording mode
12、Date
reenwich Mean Time.
4、Resolution
13、GPS
Password settings: Set the system operation and to protect the
5、Loop recording in 3 minutes
14、White Balance
password file security.
length
15、Speed display
Speed Scale: To toggle between KM/H and MPH.
6、Exposure
16、GPS speeding warning
Image rotation: Set the image rotation feature on or off.
7、Microphone
17、Driver fatigue warning
8、Power connected
18、Time
9、Motion Detection
After stopped recording, press MENU twice to enter the system
Video-Play Operation
setup.
1、After stopped recording, press MODE to enter the video-play
Format: Format the memory card; please backup your data
mode.
before formatting.
2、Press UP or Down to select the desired video to play.
Language:Support multiple languages; you can choose the
3、Press CONFIRM to start playing video.
4、Press CONFIRM again to pause the video.
language according to your preferences.
Date/Time:Set the system time.
Frequency:Adjust the light frequency of use of the
Delete Video
environment.
1、After stopped recording, press MODE to enter the video-play
LED : turn on and off light feature
mode.
Beep Sound:Switch on or off the system beep indicator
2、Press UP or Down to select the desired video to delete.
3、Press MENU, enter the menu to delete the video or delete all.
Screen Saver
:Set the screen automatic off time, or set it as
always on.
TV Mode:You can toggle between NTSC and PAL when in video
Play on Computer
output mode.
Recommended PC requirements for 1080P 30fps video playing:
Speed Stamp:Toggle on/off speed stamp.
1、intel Core 2 Duo 2.0GHz or higher CPU
Version: Check the system version number.
2、2G or above DDRII RAM
Default Setting:Reset all the settings to the default state.
3、Graphic card supports DirectX 10 or above