DOD TEC4X 사용자 설명서 - 페이지 4

{카테고리_이름} DOD TEC4X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOD TEC4X 8 페이지. Multi-effects
DOD TEC4X에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

FUNCTIONS

Program and Bank Selector Foot switches: These foot switches provide access to the TEC4's banks/programs.

Power Adapter Input: This is where the PS200R power supply is connected. Use only the DOD PS200R, other

adapters may damage the TEC4, and void the warranty.

Volume/Wah/Sensitivity Control Input: Connect optional DOD VCC1 to have real time control over volume

levels, wah ranges, and auto wah sensitivity.

Effect Selector Buttons: These buttons allow you to select the effects you wish to use or bypass.

LED Display: The LED display in program mode shows which bank and program is currently selected. In Edit

mode it shows the number and/or status of the selected effect. In Tuner mode it displays the note currently being

played.

Store and User LEDs: The Store LED indicates that a change has been made to a preset. The User LED indicates

whether you are in user, or factory banks.

Store Button: Use this button to store your custom programs in the user memory location of choice.

7 .

Up/Down Buttons: These buttons scroll up/down selected effects (edit mode), or up/down through

banks/presets (performance mode).

Output Knob: Controls the overall output level sent to your amplifier input.

Clip LED: The clip LED lights when clipping occurs in the digital section of the TEC4, To eliminate clipping,

10.

reduce the setting of the Tec4's Master Level. Allow the LED to light occasionally with peak signals.

Output Jack: Connect cable from this jack to your amplifier input, also doubles as headphone output.

11.

Input Jack: Plug in your instrument here.

12.

6 7