DOD BASSTEC 소유자 매뉴얼 - 페이지 2

{카테고리_이름} DOD BASSTEC에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOD BASSTEC 6 페이지. Input, output,and all those funky buttons

OPERATING THE BASSTEC

PLUG IN

TURN ON

ROCK OUT

Selecting programs

Use either the footswitches (1), or the bank/edit buttons (7). The first three footswitches select pro-

grams, the last footswitch selects banks. To select a specific bank, continue stepping on bank

footswitch until the desired bank number appears in display (5). Then step on footswitch 1-3 to acti-

vate program. Only user programs can be selected with the bank footswitch. To select the Factory

Presets you must use the Up/Down buttons. To make life easy, factory presets are duplicated in all

the user locations.

Editing programs

30 user slots have been provided for you to fill with programs of your own. Editing programs on the

BASSTEC has been designed to be efficient and simple. In order to change, add, or delete an

effect simply push the Effect Selector button (4), this selects the effect to edit, the currently selected

effect number will appear in the LED Display (5). Then use the Bank/Edit buttons (7) to increment

up or down through the effects and effect values. When the desired effect has been found, press

the Store Button (6). When the Store Button (6) has been pressed, the store light will blink, this is

the BASSTEC asking where you would like the program saved. Use the Bank/Edit buttons (7) to

select desired program number, press the Store Button (6) one more time to save. To remove a

currently active effect, press the Effect Selector button (4) twice and -- will appear, then press the

Store Button (6). This removes the effect from the chain. If the effect is bypassed this operation will

activate the effect.

Bypassing

To bypass, simply press the Footswitch (1) of the program you are currently using . bp will appear

in the LED Display (5), this will bypass the BASSTEC completely. To re-engage the BASSTEC,

press any footswitch.

Tuner activation

To activate tuner, press and hold the Footswitch (1) of the program you are currently using. tu will

appear in the LED display (5). To tune, pluck string repeatedly and the second vertical row of LED's

will show status of note, sharp or flat. The LED Display will show note value.

Enveloped effects

The BASSTEC contains an exciting new bass effect DOD likes to call PSYCHOBASS. These new

effects are phasors and flangers that are enveloped. This means they will respond to the strength of

your attack, creating tones previously attainable only by synthesis.

Factory reset

Caution

this function will revert BASSTEC to factory default. All user programs will be

erased.

Hold down both the Compressor and Reverb buttons while powering up the BASSTEC. The display

will read rS.

The BASSTEC has now reverted to factory default.