Etac Molift Air 300 사용자 설명서 - 페이지 15

{카테고리_이름} Etac Molift Air 300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Etac Molift Air 300 15 페이지.

Symptom

The lifter does not respond to Hand control action Emergency Stop is activated. Deactivate by push-

The lifter does not respond to Hand control up

button

When using Electrical Emergency lowering the

lifting band goes upwards

Troubleshooting

Possible Cause/Action

ing button back in.

The lifters electronics is overheated.

Wait for it to cool down.

Hand control is not plugged in properly. Open

cover and plug in Hand control. Hand control or

plug or cord can be broken an should be replaced.

Lifting strap angle sensor is activated. Adjust

lifting strap or move hoist to reduce lifting strap

angle.

Lifting band has gone completely out, and has

been winded the wrong way.

Use manual emergency lowering. Send lifter to

service.