Flepcher FLP-CD-930 운영 매뉴얼 - 페이지 7
{카테고리_이름} Flepcher FLP-CD-930에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Flepcher FLP-CD-930 10 페이지. Cd+tuner player
Flepcher FLP-CD-930에 대해서도 마찬가지입니다: 운영 매뉴얼 (11 페이지)
페이지 인쇄
4.CONTROL INSTRUCTION
1. Press the power switch, turn on the power. The power indicator lights up, the screen shows
CLOSE, the machine reads the disc status after 2 seconds, the screen shows CORD. If there
is no disc in the machine, the screen shows NO DISC.
2. Press the "EJECT" button on the panel, the screen shows OPEN, and the machine automatically
sends out the tray.
3. Place the disc on the tray.
4. Press the "EJECT" button again, the screen shows CLOSE, and the disc reads (CORD) after 2S.
5. After reading the disc normally, all discs will automatically play in a loop..
6. After pressing the stop key, the total track and total time display are stopped.
7. Press the Play button to play all loops again.
8. Insert a USB device or SD card, and press the USB / CD button on the remote control to read the
contents and operate it through the remote control or the function buttons on the panel.
(Note: USB devices support up to 8GB)
9. If there is no disc in the CD player, it will automatically switch to read USB device or SD card.
10. The effective range of the remote control should be within 6 meters, and the effective remote
control angle is ± 45 degrees.
11. Press the remote control to control the corresponding CD and MP3 functions.
12. Press the "A / F / B" key on the panel to select the Bluetooth mode. Turn on the Bluetooth of the
mobile phone. After FLP-CD930 device is searched, click to enter the default connecting
code: 8888. The mobile phone will automatically connect. After that, you can play your phone's
music normally.
CONNECTION:
AM/FM tuner left channel output
AM/FM tuner right channel output
UNBAL/75Ω
Connect FM antenna
Connect
AC
power
Connect AM antenna
ANT
FM
AM
LOOP
BT-ANT
ANT
Bluetooth external antenna
CD right channel output
CD left channel output
TUNER
CD PLAYER
R
L
R
L
AUDIO OUTPUT
7