AkraLab PLUGGO 사용자 핸드북 - 페이지 13
{카테고리_이름} AkraLab PLUGGO에 대한 사용자 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. AkraLab PLUGGO 15 페이지. Automated de-capper
페이지 인쇄5.2 Repackaging instructions
When necessary to ship Pluggo unit for service or repair, please follow the instructions
below to pack the instrument. Do not include the plexiglass cover, chute or carousels in
the shipment.
Remove chute and any carousel from Pluggo.
1.
Clean the unit and de-capper head according to the "Cleaning Instructions".
2.
Remove the two screws holding the plexiglass cover and lift off. Use tape to fix screws
3.
to the inside of the cover. Place the plexiglass cover at a safe place. It will not be sent.
Use the original box with packing material and lift out all material except for the bottom
4.
and side wall foam material.
Place Pluggo unit into box. Do not include the plexiglass cover.
5.
Make sure the power cord is tucked to the side of the unit.
6.
Place the cardboard on top of the Pluggo unit. Cut down the box in the corners to
7.
reduce the height down to the top level of the unit. This will ensure stability of the
content during shipment. Do not include chute or carousels in box.
Include a written message with service request or description of technical problems. Do
8.
not forget to include Company name and complete address for return after
service/repair.
Seal the box and label with appropriate shipping address.
9.
[email protected] · 965 116 521 · 902 222 275 · www.akralab.es
13