Acqua GY-NE272TM 사용 설명서 - 페이지 5
{카테고리_이름} Acqua GY-NE272TM에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acqua GY-NE272TM 15 페이지.
페이지 인쇄A
Model
1301
RT419N4CGN
5
5
1172
RT328N4CGN
1172
RT295N4CGN
It may not work properly if being left at
A
Model
A
Model
a temperature above or below the
1301
RT419N4CGN
1301
indicated range for a long period.
RT419N4CGN
1172
RT328N4CGN
RT328N4CGN
1172
Climate class
Ambient temperature
1172
RT295N4CGN
1172
RT295N4CGN
SN
N
It may not work properly if being left at
It may not work properly if being left at
ST
a temperature above or below the
a temperature above or below the
T
indicated range for a long period.
indicated range for a long period.
●
Stand your appliance in a dry place to
Climate class
Ambient temperature
avoid high moisture.
Ambient temperature
Climate class
SN
Keep the appliance out of direct
●
SN
N
sunlight rain or frost. Stand the
N
ST
appliance away from heat sources
ST
T
such as stoves, fires or heaters.
T
Leveling of appliance
Stand your appliance in a dry place to
●
Stand your appliance in a dry place to
●
For sufficient leveling and air
●
avoid high moisture.
avoid high moisture.
circulating in the lower rear section of
●
Keep the appliance out of direct
●
Keep the appliance out of direct
the appliance, the bottom feet may
sunlight rain or frost. Stand the
sunlight rain or frost. Stand the
need to be adjusted. You can adjust
appliance away from heat sources
appliance away from heat sources
them manually by hand or by using a
such as stoves, fires or heaters.
such as stoves, fires or heaters.
suitable spanner.
Leveling of appliance
Leveling of appliance
To allow the doors to self-close, tilt
●
For sufficient leveling and air
●
For sufficient leveling and air
●
the top backwards by about 10mm.
circulating in the lower rear section of
circulating in the lower rear section of
the appliance, the bottom feet may
the appliance, the bottom feet may
need to be adjusted. You can adjust
need to be adjusted. You can adjust
them manually by hand or by using a
them manually by hand or by using a
suitable spanner.
suitable spanner.
To allow the doors to self-close, tilt
●
To allow the doors to self-close, tilt
●
the top backwards by about 10mm.
the top backwards by about 10mm.
Reversing the door
NOTE: It is recommend that a registered
The side at which the door opens can
service agent carries out any door hinge
be changed, from the right side (as
modification at the customers cost. Any
supplied) to the left side, if the
costs or subsequent damage that is
installation site requires.
incurred to door modification will not be
covered under warranty.
Reversing the door
Reversing the door
The side at which the door opens can
The side at which the door opens can
be changed, from the right side (as
be changed, from the right side (as
supplied) to the left side, if the
supplied) to the left side, if the
installation site requires.
installation site requires.
B
C
740
960
670
938
938
670
B
C
C
B
740
960
740
960
670
938
670
938
938
670
938
670
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
+10°C to +32°C
+10°C to +32°C
+16°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +38°C
+16°C to +43°C
+16°C to +43°C
≤10mm
≤10mm
≤10mm
Hisense Refrigerator
Hisense Refrigerator
Hisense Refrigerator
Warning! When reversing the door, the
appliance must not be connected to
the mains. Ensure that the plug is
removed from the mains socket.
Tools you will need
Warning! When reversing the door, the
Warning! When reversing the door, the
appliance must not be connected to
8mm socket wrench
appliance must not be connected to
the mains. Ensure that the plug is
the mains. Ensure that the plug is
removed from the mains socket.
removed from the mains socket.
Thin-blade screwdriver
Tools you will need
Tools you will need
Note: Before you start lay the
refrigerator
on its back in order to
gain access to the base you should
8mm socket wrench
8mm socket wrench
rest it on soft foam packaging or
similar material to avoid damaging
Thin-blade screwdriver
the backboard of the refrigerator
Thin-blade screwdriver
,
reverse the door the following steps
Note: Before you start lay the
Note: Before you start lay the
are generally recommended
refrigerator
on its back in order to
refrigerator
on its back in order to
1. Stand
the
refrigerator
gain access to the base you should
gain access to the base you should
Open the upper door to take out all
rest it on soft foam packaging or
rest it on soft foam packaging or
door racks (to avoid rack sdamaged)
similar material to avoid damaging
similar material to avoid damaging
and then close the door
the backboard of the refrigerator
the backboard of the refrigerator
,
reverse the door the following steps
,
reverse the door the following steps
are generally recommended
are generally recommended
1. Stand
the
refrigerator
1. Stand
the
refrigerator
Open the upper door to take out all
Open the upper door to take out all
door racks (to avoid rack sdamaged)
door racks (to avoid rack sdamaged)
and then close the door
and then close the door
2. Stand the refrigerator upright, first
remove the screw cover
②
the screw
and unscrew the upper
③
hinge cover
which is at the top right
corner of the refrigerator, and use a
putty knife or thin-blade
to prize the screw hole cover
2. Stand the refrigerator upright, first
is at the top left corner of the
2. Stand the refrigerator upright, first
remove the screw cover
refrigerator.
remove the screw cover
②
the screw
and unscrew the upper
②
the screw
and unscrew the upper
③
hinge cover
which is at the top right
③
hinge cover
which is at the top right
corner of the refrigerator, and use a
corner of the refrigerator, and use a
putty knife or thin-blade
putty knife or thin-blade
to prize the screw hole cover
to prize the screw hole cover
is at the top left corner of the
is at the top left corner of the
refrigerator.
refrigerator.
Cross-shaped screwdriver
8mm wrench
,
Cross-shaped screwdriver
Cross-shaped screwdriver
8mm wrench
.
To
8mm wrench
.
.
upright
,
,
.
.
To
.
To
.
.
.
upright
.
upright
.
.
Door racks
Door racks
Door racks
①
and loose
screwdriver
④
which
①
and loose
①
and loose
screwdriver
screwdriver
④
which
④
which