100FIT 150S 소유자 매뉴얼 - 페이지 7

{카테고리_이름} 100FIT 150S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 100FIT 150S 10 페이지.

Step 3

Insert the saddle post(45) into the

main frame (1) as shown after

loosening and pulling out the

adjusting knob(19),and then select a

desired height to align the hole,and

then fix it tightly by the adjusting

knob(19).

--Fix the seat (52) on the post of the

seat sliding set(49)properly by

spanner.

--Loosen the L adjusting knob(51)

and adjust the seat to your desired

distance, then tighten it properly by

the L adjusting knob(51).

Note: Do not exceed the mark "stop

Step 4

Insert the handle bar post(54) into

the main frame (1) as shown after

loosening and pulling out the

adjusting knob (19), and then select

a desired height to align the hole,and

then fix it tightly by the adjusting

knob(19).

--Fix the handle bar(53) into the

handle bar post(54), and tighten it

adjusting

properly with wash and

knob(51)

Note: Do not exceed the

marked"stop"

Caution:

Now the equipment is completed assembled, if you find it is not leveled on the floor you can adjust

it by the adjusting pads(64) . Make sure you have tightened all th-e screws and nuts well before

beginning your workout .