Clinton 85100 운영, 관리 및 유지보수 - 페이지 6

{카테고리_이름} Clinton 85100에 대한 운영, 관리 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Clinton 85100 8 페이지. Power imaging tables

ADJUSTMENTS

(continued)

OPTIONAL LOCKING CASTERS (all models)

Locking casters are an option on all models. The locking mechanism can be engaged by using your foot to

depressing the tab located at the rear of each caster. This locks the swivel of the caster and acts as a brake to

minimize movement of the wheel. ALL FOUR CASTERS MUST BE LOCKED TO ENSURE MINIMAL MOVEMENT

OF THE TABLE. Casters can be added or removed in the field.

Caster in the mobile position.

TROUBLE SHOOTING

PROBLEM: Table is squeaking.

SOLUTION: Lubricate the table at designated points using Molykote G-0052Fg grease.

See drawing below for lubrication locations.

Back Rest

End Plug

Top Frame

Top Frame Axle

Center Axle

Lubricate using

Molykote G-0052Fg

grease.

Base Axle

Base

Caster in the lock position.

Back Rest Actuator Arm

Back Rest Cylinder

Motor

Slide Block, 4 total (Base and Top Frame)

Lubricate using Molykote G-0052Fg

grease, top and bottom contact points.

Foot Lift Actuator

Arm