3M 6000 사용자 지침 - 페이지 9

{카테고리_이름} 3M 6000에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M 6000 15 페이지. Half facepiece respirator
3M 6000에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지), 사용자 지침 (16 페이지), 기술 데이터 시트 (5 페이지), 지침서 (2 페이지), 지침서 (8 페이지), 사용자 지침 (2 페이지)

페이지 인쇄

User Seal Checks

Always check the seal of the respirator on your face before entering a contaminated area.

Positive Pressure User Seal Check

1. Place the palm of your hand over the opening in the exhalation valve cover and exhale gently.

2. If the facepiece bulges slightly and no air leaks are detected between the face and the facepiece, a proper seal has been obtained (Fig. 11).

3. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck

seal.

If you cannot achieve a proper seal, DO NOT enter contaminated area. See your supervisor.

Negative Pressure User Seal Check with 6000 Series Cartridges

1. Place palms of hands to cover face of cartridge or open area of 3M™ Filter Retainer 501 and inhale gently. If you feel the facepiece collapse

slightly and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained (Fig. 12).

2. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and

recheck seal.

If you cannot achieve a proper seal, DO NOT enter contaminated area. See your supervisor.

NOTE: Use of 3M™ Filter Retainer 501 may aid respirator wearer in conducting a negative pressure user seal check.

Negative Pressure User Seal Check with 2000 Series Filters

1. Place your thumbs onto the center portion of the filters, restricting airflow through filters and inhale gently. If you feel the facepiece collapse slightly

and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained (Fig. 13).

2. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate the leakage and

recheck seal.

If you cannot achieve a proper seal, DO NOT enter contaminated area. See your supervisor.

Fig. 9

Fig. 11

Fig. 13

Requester: Farrel Allen

Creator:

deZinnia

File Name: 12703-14_6800NegFit_w-7093

Structure #: NA

Supersedes: NA

Date:

03/21/12

Scale:

1 Inch

6864_w2000_NegFit.eps

4/12/04 K&K

(English)

Fig. 10

6800_w6864 adjust.eps

8/16/04 K&K

Fig. 12

6864_w6000cart 501NegFit.eps

4/12/04 K&K

Fig. 14

6864_w6000cart 501NegFit.eps

4/12/04 K&K