100FIT 190S 소유자 매뉴얼 - 페이지 7

{카테고리_이름} 100FIT 190S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 100FIT 190S 11 페이지.

STEP 1

--Attach the front stabilizer (6) which is with

transportation wheels to the main frame as

shown and fix it tightly with washers， (42)

and screw (45) by hex wrench.

--Attach the rear stabilizer (7) to the main

frame as shown and fix it tightly with bolts

(43), washers (42) and cap nuts (17) by

spanner.

STEP 2

-Fix the left pedal (37) which is marked "L" onto the

left crank (36) marked "L" by spanner tightly in

anticlockwise; and then fix the right pedal (28) which

is marked "R" onto the right crank (29) marked "R" by

spanner tightly in clockwise

STEP 3

-- Fix the Saddle (8) to the saddle sliding set (3) as shown

tightly with the nuts under the saddle by spanner. Then slide

it to a desired position and tighten it by the knob (9).

--Insert the saddle post (2) into the tube as shown after

Loosening and pulling out the Knob (22), and then select a

desired height to align the hole, and then fix it tightly by the

knob (22).

Note: Do not exceed the mark "stop".

STEP 4