Etac immedia IM4110S 사용 설명서 지침 - 페이지 8
{카테고리_이름} Etac immedia IM4110S에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Etac immedia IM4110S 9 페이지.
Etac immedia IM4110S에 대해서도 마찬가지입니다: 짧은 지침 (4 페이지), 짧은 지침 (4 페이지)
페이지 인쇄
Thank you for choosing an Etac product. If the customer makes adjustments, repairs or combinations not predetermined by Etac, the
Etac CE certification and Etac warranty will be voided.
Warranty: Two-year warranty on material and manufacturing defects, provided that the product is used correctly. Before taking a
product in service always make a risk assesment according to national and/or local legislation.
First inspection:
•
Is the packaging intact?
•
Read the label on the packaging and check the article no. and product description
•
Check that Short Instruction is enclosed – updated User Manual/Instruction for use can be downloaded from www.etac.com or contact your
Etac Customer Service or the local distributor.
•
Check the label on the product - does it include article no., product description, lot/batch no., cleaning instructions and supplier name?
Periodic Inspection:
•
Make sure that your Manual transfer system always is in a perfect condition.
•
After wash – always check materials, stitching, handles, buckles.
•
If the product shows signs of wear and tear, it must be removed from service immediately.
•
Lot no/Batch no:
x
Production year
Visual inspection/Check the product:
Ensure that the materials, seams, stitching,
handles, buckles are intact/faultless.
Mechanical load or stress/Test handles:
Draw hard in the handles in opposite directions
and control the material, seams and stitching.
Test buckles:
Lock the buckle and draw in opposite directions,
control the buckle and the stitching.
Check always:
Manual transfer aids with handles, straps and buckles:
Manual transfer aids with high or low friction:
If in doubt, please contact Etac Customer Service or local distributor for more information and guidance.
For more information about training and the use of these products, contact the Etac transfer experts – www.etac.com.
Class 1 - European Council
Directive MDD 93/42/EEC
on medical devices
Service Information
x
x
x
x
x
Running number
x
x
x
x
Manual transfer aids for sitting and lying transfer:
The product can be
scrapped in accordance
with national regulations
8
Stability test:
Try to bend the product verify that it feels firm,
stable and solid.
Test low/high friction:
Place the product on a firm surface or a bed,
place your hands on the material and test the
friction by pushing your hands down into the
product.
Low friction – slides effortlessly
High friction – no sliding/moving
Read the
User Manual