Clinton Electronics CE-M27A-PIR 기본 설정 매뉴얼 - 페이지 8
{카테고리_이름} Clinton Electronics CE-M27A-PIR에 대한 기본 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clinton Electronics CE-M27A-PIR 9 페이지. Pvms w/ axis m3065
Clinton Electronics CE-M27A-PIR에 대해서도 마찬가지입니다: 기본 설정 매뉴얼 (7 페이지)
페이지 인쇄
M3065 Camera Troubleshooting
ATTENTION:
Updating the fi rmware may result in loss of the camera image on the PVM. Follow the steps
below to re-enable the camera image.
If the updated fi rmware shows with the menu bar
on the left side of the page:
After logging into the camera, click the
1
System menu option.
Scroll down in the left-side navigation menu,
2
then click on Video out.
Click to toggle to turn ON HDMI if it is not
3
currently enabled.
The camera image should display on the PVM
shortly after turning ON the HDMI.
See next page if the web page for the camera loads with the older 2017~20 version, with the
menu options at the bottom of the screen.
Basic Setup Guide: "A-Series" PVMs w/ AXIS 3065 Camera
11.21.22
*2020+ Web UI (Axis Web ver C)
Click System
Scroll
Down
Select Video Out
Information in this document is subject to change without notice.
8
Turn ON