Clinton Electronics CE-PVM2MPF 사용자 설명서 - 페이지 9
{카테고리_이름} Clinton Electronics CE-PVM2MPF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clinton Electronics CE-PVM2MPF 19 페이지.
페이지 인쇄
IP CAMERA
Follow the steps detailed below to edit the ADMIN password, or to create new user accounts.
To access the User Management page, click the User icon in the top right corner or click User, then select
Management.
Click the Edit (Pencil) icon
1
Enter the old password
2
Click Confirm.
Enter new password
3
The new password must be a minimum of 8 characters in length, but no longer than 16 characters.
Confirm new password
4
Re-enter the new password.
Click OK to save the new password
5
You will automatically be logged out after saving the new password, log back in with new password.
If the ADMIN password is lost, the camera will require a Factory Default. Refer to the Factory Default procedure
detailed in the PVM Basic Setup Guide. Factory Default will erase the password set during initial setup.
8
/