CLINTON INDUSTRIES 199 서비스 매뉴얼 - 페이지 3
{카테고리_이름} CLINTON INDUSTRIES 199에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CLINTON INDUSTRIES 199 16 페이지.
페이지 인쇄I.
GENERAL INFORMATION
A. INTRODUCTION
The air Operated Underbed Trimmer contains a trimming system that cuts both the
needle and bobbin threads simultaneously. A movable and a stationary blade, mounted
on the throat plate are used in combination to pick up and cut the threads.
Solid state electronics are used to sense the position of the needle and to trigger the
trimming mechanism at the proper time as well as to control footlifting and backtacking
operations.
B. APPLICATION
The underbed Trimmer/Positioner enables the operator to automatically control the
position of the needle in or out of the work, thereby eliminating the need for hand position-
ing. In addition, the top and bottom threads are automatically cut beneath the throat
plate after positioning. This eliminates the need for hand trimming.
C. SYSTEM COMPONENTS
The trimmer components, which can be either pre-installed on the sewing machine head
and factory tested, or field installed, include:
1. Standard Components
a. Pulloff Assembly
b. Tension Release and Pulloff Assembly
c. Thread Cutter and Wiper Air Cylinder Assembly
d. Solenoid Air Valve Control Unit
2. Optional Components
e. Foot Lifter
f. Needle Cooler
g. Folder Opener
D. TUBING
1/8" O.D. X 1/16" I.D.
MATERIAL VINIL
30-1134-01 CLEAR
-02 YELLOW
-03 RED
-04 BLACK
-05 BLUE
-06 GREEN
-07 ORANGE
-08 WHITE
-09 GRAY
-10 BROWN
3/16" O.D. X 3/32" I.D.
MATERIAL POLYURETHANE
30-1540-01 CLEAR
-02 YELLOW
-03 RED
-04 BLACK
-05 BLUE
-06 GREEN
-07 ORANGE
-08 WHITE
-09 GRAY
-10 BROWN
ML199-6
1/4" O.D. X 1/8" I.D.
MATERIAL POLYURETHANE
30-2102-01 CLEAR
-03 RED