CLINTON INDUSTRIES 1190E 매뉴얼 - 페이지 4

{카테고리_이름} CLINTON INDUSTRIES 1190E에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CLINTON INDUSTRIES 1190E 19 페이지.

MODES OF OPERATION:

The LCD display can be operated in three (3) different modes.

They are:

1. OPERATING MODE:

2. PROGRAMMING MODE: To change a parameter

TEST MODE

Two different parameter levels are available:

To use the MECHANICS LEVEL, please see the section 2.0.0 (Access to "HIDDEN

PARAMERTERS)

1.0.0.

HOW TO CHANGE A PARAMETER:

Four parameter groups are available (OPERATORS LEVEL)

To change a parameter, please proceed the following sequence:

STEP 1

Push the 'ARROW ROUND' button repeatedly until the desired parameter group is displayed.

STEP 2

Push the 'SET' button repeatedly until the desired parameter is displayed

STEP 3

Change the parameter with the buttons:

In the group 'TOGGLE SWITCHES' , either button, "ARROW UP" or "ARROW DOWN"

will toggle the parameter.

PLEASE NOTE:

To optimize a certain parameter, it may be necessary to go repeatedly from the operation mode

back to the same parameter.

It can be easy done by pressing the 'SET' button.

If the program is in the OPERATION MODE, the SET button takes you right back to the last

displayed parameter.

Exemption:

If you are in the group "TOGGLE SWITCHES", the "SET" button brings you to the first parameter of the

group "TOGGLE SWITCHES"

If a parameter was changed by accident and the machine doesn't work properly, it is possible

to go back to the original factory setup by using the feature of the MASTER RESET (section 3.0.0).

To operate the machine

An easy way to maintain and check the system.

OPERATORS LEVEL (Basic)

MECHANICS LEVEL (Advanced)

SPEEDS

TIMERS

COUNTERS

TOGGLE SWITCHES.

'ARROW-UP'

'ARROW DOWN'

-- 4 --

(increase the value)

(decrease the value)