3M 6100 빠른 시작 매뉴얼

{카테고리_이름} 3M 6100에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M 6100 2 페이지. Half facepiece respirator
3M 6100에 대해서도 마찬가지입니다: 사용자 지침 (16 페이지), 기술 데이터 시트 (3 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 지침 (2 페이지)

페이지 인쇄

Quick Start Guide

Half Facepiece Reusable Respirators 6100 (Sm)/6200 (Med)/6300 (Lg)

™

and 3M

Particulate Filter 7093, P100. Optional 3M

™

6100/6200/6300

Notes:

• Before using these respirator systems, all users must read and understand the product User Instructions.

• Do not use with beards or other facial hair or other conditions that prevent a good seal between the

face and the faceseal of the respirator.

• Perform hand hygiene and use other applicable PPE as determined by your facility and/or infection

control policy.

Step 1: Inspection

Inspect all components according to the product User Instructions prior to each use. Check for cracks,

tears, holes, deformation or missing components.

Step 2 (optional): EVF Connection to Facepiece

2. Align the connector

1. Ensure the valve

cover of the 6000

Series facepiece is

clean,

uncontaminated

and undamaged.

The valve cover is

on the front of the

respirator and has

a large 3M logo.

There are four

breathing slots

surrounding the

logo.

7093 (x2)

3. Press the EVF

onto the valve

tabs and hooks on

cover. The EVF

the back of the EVF

should sit evenly

with the breathing

on the valve

slots of the valve

cover.

Tip: Installing the

EVF with either

hook at the top

position may help

with proper

alignment of the

EVF.

Exhalation Valve Filter 604

™

604 (Optional)

4. If the EVF is not

seated evenly on

the valve cover,

as shown above,

in Fig. 4, repeat

steps 2 & 3.

February, 2021

5. Slowly rotate the

EVF clockwise

until rotation

stops. Pull

outward lightly

on the EVF to

confirm a

complete

connection.