DOEPFER A-155 매뉴얼 - 페이지 6
{카테고리_이름} DOEPFER A-155에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOEPFER A-155 16 페이지.
페이지 인쇄A-155
Analog / Trigger Sequencer
a speed determined by the Glide control knob (fig. 2).
If you patch the output from the Gate row into the
Glide Ctrl. input §, you can switch the glide func-
tion on or off for each step, like on the Roland TB-
303 (see fig. 2). If you patch the gate output through
an A-165 trigger modifier, every gate activates 'glide'.
1
2
3
Trig. 3
Gate
Clock
Gate
Pre Out
Post Out
fig. 2: glide function
6
System A - 100
4
5
6
7
8
9 Control
The control section 9 includes four push-buttons for
manual sequencer control. Alternatively, digital control
signals can be sent to four corresponding sockets.
• Start
:
Used to start the sequence - i.e. to set it
running.
• Stop
:
Used to stop the sequence.
• Step
:
Used to step through the sequence one
step at a time. Each button-press corre-
sponds to a clock pulse.
• Reset
:
Used to 'reset' the sequence - i.e. to send
it back to begin again at step one.
doepfer