Clipper Norton CG 25 S 사용 설명서 - 페이지 4
{카테고리_이름} Clipper Norton CG 25 S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clipper Norton CG 25 S 12 페이지.
페이지 인쇄It is important that all persons who are working or maintaining with this machine will read the manual
carefully and understand it fully. Keep this manual near to the machine, so it can always be consulted.
Only authorized and trained personnel may operate the machine.
The CG 25 S is an electric driven floor grinding machine for treating horizontal surfaces. The machine has
a rotating adapter plate where the diamond or multiflail disc can be fixed on.
The rotating parts are covered by a sliding protecting cap with a connection for a dust hose.
With a suitable Clipper dust collector you can work without causing dust.
The machine can be levelled by turning the height adjustment handle.
Application
The CG 25 S can be used on almost any floor to plane, to make ready for coatings, or to remove coatings
or glue residues.
1
Height adjustment handle
2
Handgrip
3
On / Off emergency switch
4
Dust hose connection
5
Driving motor
Accessory's
There are several types of discs that may be used on this machine.
The discs that can be used are:
GRD25S
Diamond grinding plate
GRM25S
Multiflail rotary disc
1. Introduction
2. Machine description
6
Lifting handle
7
Coupling
8
Flexible coupling
9
Adapter plate
10
Cutter plate / diamond disc
70184627119
70184627120
4