Clipper Norton CG 25 S 사용 설명서 - 페이지 9

{카테고리_이름} Clipper Norton CG 25 S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clipper Norton CG 25 S 12 페이지.

Work only with original Norton and Clipper parts.

Check regularly to see if the diamond disc is in good condition. Replace immediately the diamond disc

when this is damaged or worn out.

Check if the flexible coupling is stiff enough, after every 2 diamond disc changes. Replace if any

deformation or damage is found, replace the coupling after use of 7 diamond discs. Unusual vibrations on

the machine check immediately the diamond disc and flexible coupling.

Pull out the main plug

Remove the diamond disc

Remove the protection cap

Loose the bolts of the adapter plate and the flexible coupling

Take a new flexible coupling and assemble this together with the adapter plate on the fixed coupling

on the motor axle.

Assemble the protection cap

Prevent premature wear by keeping the machine as dust free as possible. Clean the machine for this

reason regularly with a dust collector.

Clean the machine every day with air and non-aggressive materials. Never use a high pressure water

cleaner to clean the machine.

Remove the diamond disc after using the machine.

Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motor from

moisture, heat, dust and shocks.

All repair work must to be done by qualified Saint-Gobain Abrasives personnel, this to guarantee a safe

and reliable machine.

Any guarantee on the machine is expired when:

Non original Norton and Clipper parts and diamond discs have been used.

Repair work is not done by qualified Saint-Gobain Abrasives personnel

Changes, add on's or conversions are undertaken without written permission of Saint-Gobain

Abrasives.

6. Maintenance