DOEPFER A-100 Series 매뉴얼 - 페이지 4

{카테고리_이름} DOEPFER A-100 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOEPFER A-100 Series 8 페이지. Analog modular system, connecting the breakout module to the main module
DOEPFER A-100 Series에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 매뉴얼 (16 페이지), 사용자 설명서 (12 페이지), 조립 및 배선 매뉴얼 (6 페이지), 매뉴얼 (8 페이지), 매뉴얼 (6 페이지), 연결 (8 페이지)

페이지 인쇄
DOEPFER A-100 Series 매뉴얼
A-123
VCF 4
At close to maximum resonance, the filter starts to
self-oscillate, and behaves like a sine wave oscilla-
tor. Thanks to this effect, you can use the filter as an
independent tone source.
Resonanz
0 db
Fig. 2:
How resonance affects the behaviour of a
high pass filter.
4
System A - 100
Frequenz
f c
4. In / Outputs
! Audio In
This is the filter's audio input socket, where you
patch in the output from any sound source.
" FCV 1
Socket FCV 1 is a voltage control input for the filter.
It works on the 1V / octave rule, like the VCOs.
If you connect the output of a modulation source (eg
LFO, ADSR) to this input, the cut-off frequency of the
filter will be modulated by its voltage: ie, the sound
color changes according to the voltage put out by the
modulator.
P
If you use this VCF as a sine wave oscillator,
connect a pitch control voltage to this input.
Do the same if you want the filter's cut-off
frequency to track exactly with the pitch of a
note.
§ FCV 2
Socket § is also a voltage-control input for the filter.
Unlike on socket ", though, you can adjust the level of
voltage by using the attenuator 3, and thus control the
intensity of modulation effect on the filter.
doepfer