Doepke Dupline DRO 2 사용 설명서 - 페이지 5

{카테고리_이름} Doepke Dupline DRO 2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doepke Dupline DRO 2 8 페이지. Shutter control unit

페이지 인쇄

Doepke

7. General Information

The shutter control unit DRO 2 is a component of the Dupline building management sys-

tem and allows switching up to two independent shutters as well as sunblinds or electri-

cal dormers. Thereby, the motors can be driven at different phases. The relay contacts

for the "UP" and "DOWN" direction are locked electronically and mechanically as well as

logically by the channel generator.

The green LED in the modular plug at the front of the unit indicates the correct operation

of the Dupline bus.

For the control of motors it is absolutely necessary to use the ProLine

object „Roller blind", since otherwise the required reverse delays cannot

be kept. This may lead to damages at the relay contacts and the motors

connected to them.

8. Coding

With the hand encoder DHK 1 each channel can be assigned any address between A1

and P8 using the modular plug at the front of the DRO 2. The channel allocation is as

follows:

Channel

Motor 1 UP

Motor 1 DOWN

Motor 2 UP

Motor 2 DOWN

Channels, which are not used, should not be encoded. The encoding of the DRO 2 can

be done without operating voltage and without any connection to the Dupline bus. The

encoding remains permanently but can be overwritten at any time.

The address assignment has to be done in that way, that the channels for the UP and

DOWN directions of each motor get consecutive addresses. It is always necessary to

start with an odd address.

Example:

The preferred direction in case of a bus disturbance ("UP" or "DOWN") can as well be

selected with the hand encoder commonly for all relays; by default, "UP" (channel value

„1") is adjusted. By setting the value „0", the DRO 2 activates the direction „DOWN" in

case of a bus disturbance.

Operating Instructions

Dupline Shutter Control Unit DRO 2

Description

Motor 1

Motor 2

CAUTION!

Channel

Wrong

DOWN

3931169/03/05/F

Description

Not assigned

Right

DOWN