Cygnett CY3459WLCCH 사용자 설명서 - 페이지 2
{카테고리_이름} Cygnett CY3459WLCCH에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cygnett CY3459WLCCH 2 페이지. Wireless vent
페이지 인쇄A
D
E
C
A
Spring-loaded clip
B
Adjustable ball joint for tightening ring
C
Micro-USB Input
D
Wireless charging output
E
Quick release button
B
Installation Instructions
Vent Mounting
Attach the product to your vent by pushing the spring-loaded
clip (A) and hook it onto the back of the vent blades in your
vehicle Once hooked on, release the spring-loaded clip to
grip onto the vent.
Adjusting the viewing angle
Adjust the angle by loosening the tightening ring (B) of the ball
joint on the back of the product. Once you are happy with the
viewing angle, tighten the ring (B) to hold in place.
Connecting the power source
end into the 12V USB Car Adapter and plug into your vehicle's
12V power socket.
Charge your device wirelessly
To wirelessly charge your device, place your device on the
wireless charging output (D) and secure it with the retractable
arms. To remove your device, press the quick release button
(E) to open the retractable arms.
ExoDrive Wireless Vent
Name
Item Number
CY3459WLCCH
5.0V⎓2.0A (10.0W)
Micro-USB Input
9.0V⎓2.0A (18.0W)
5.0W
Wireless Output
7.5W
10.0W
Total Output
10.0W
Working Frequency Bands (For CE)
109.94kHz-165.38kHz
Max Output Power (For CE)
-17.79dBuA/m@10m
FCC ID
2AEDZCY345XWLCCH
Troubleshooting
Not charging or slow charging
Please ensure you are using the supplied power adapter within the wireless charger. Using
other chargers may result in slow charging or no charge at all. If you need to replace the
power adapter, please make sure it supports QC 3.0 and supports a 12V USB output.
For optimum charge speed, adjust your device so that it is aligned to the centre of the wireless
charging by removing it and checking the performance. Some cases interfere with wireless
charging if they contain metallic material or are overly thick.