Dog Care TC01 사용자 설명서 - 페이지 13

{카테고리_이름} Dog Care TC01에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dog Care TC01 17 페이지. Dog training collar
Dog Care TC01에 대해서도 마찬가지입니다: 매뉴얼 (17 페이지)

5. Static stimulation is not a pleasant experience for any dogs. Punishment

is harsh way to train a dog. Always praise and encourage your dog for

good behavior. Note: With Anti-Misoperation design, Static function

always cut-off after 4 secs, this is a precaution designed to prevent

unintentional long-pressed of the button, and potential animal abuse.

IX. Troubleshooting

1. Remote/Receiver runs out of power quickly; not charging

Make sure the charger and Remote/Receiver is securely connected. Try

to use other universal android USB cable to charge.

2. Static is too weak or even completely no static; Static Mode has no

effect on my dog. Make sure the receiver has enough power(when it is

low-battery, shock doesn't work); Only both electrodes are simultaneous

ly touched by dog's skin shock will work; Try to increase the static level to

more than 45. If dog has long hair, you need to separate dog hair to

make electrodes touched.

3. Remote/Receiver does not response

Recharge the Remote/Receiver,make sure they have enough power.

Check the keypad lock(which is on the left side of Remote), unlock the

Remote. If Remote is locked, there will be a lock icon on the display. If

you try methods above but still fail, please remove all the matching and

reconnect Remote with Receivers.

4. Receiver is fully charged, but Remote Display still shows receiver

has empty battery.

Turn off Remote and turn on Remote again.

5. Fail to match Receiver with Remote

Make sure Receiver is connected to a power source( charging mode can

only be activated while charging).Must hold Channel Switch more than 5

secs, if not, matching will fail.If you still fail after trying as above, contact

us via [email protected] to confirm whether receiver and

remote is of the different version, we will solve for you.

6. Training mode fails to sync up even in a very short distance

Make sure there is no strong signal interference in your surroundings.

Remote's range could fluctuate subjects to obstacles, electromagnetic

field, or even stormy weather.

7. Receiver beeps, vibrates, shocks by itself constantly or occasionally.

Make sure no button of Remote has been pressed or gotten stuck.

If any quality problems or confusion, feel free to contact us via

X. Operating Environment & Maintenance

Do not use the product in the circumstances as follow:

1. Do not operate the devices under temperature of 104°F and above, doing

so in such high temperature will decrease the performance of the batteries.

2. Do not use the Remote during snowing, this could lead to water sipping in

causing damage to the controller.

3. Do not use the set in places with strong electromagnetic interference. This

will greatly compromise the performance of the product.