Cannondale MC500 서비스 게시판 - 페이지 4

{카테고리_이름} Cannondale MC500에 대한 서비스 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Cannondale MC500 5 페이지. Cannondale engine control unit service bulletin

10. From Windows START button (lower left

corner of the computer screen) select the

Cannondale Diagnostic and Maintenance

program group and select Code Download.

An MS-DOS program window will open.

11. At the prompt type: D H002V04F

press ENTER yet. D means "download" and

H002v04f is the name of the new operating code

file that the program will transfer to the ECU in the

coming steps.

D H002V04F

12. Have an assistant PRESS AND CONTINUE

TO HOLD the engine start button on the

vehicle.

13. As your assistant holds the engine start

button, press the ENTER key on your

computer - you will see live data transfer

information in the MS-DOS window.

SBM01_05.fm

14. When

displays in the lower area of the program

window, your assistant can release the

engine start button.

Type Y and the MS-DOS window will

disappear and the Cannondale Diagnostic

but do not

Tool main menu should be visible again.

15. Click the SEND Calibration file (to ECU)

button. The new calibration file together with

the vehicle specific variables read from the

ECU before the operating code installation

will be installed into the ECU.

When the send complete window displays,

click OK.

16. Reconnect the starter solenoid. Make sure

the connector is latched properly.

17. Disconnect the data cable from the vehicle.

18. Reinstall removed components.

19. Test engine operation.

the

transfer

complete

message