DOGA BTP 사용 설명서 - 페이지 8

{카테고리_이름} DOGA BTP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOGA BTP 16 페이지. Battery screwdrivers

Forward/ Reverse Rotation Switch Operation

To prevent damage, do not press Forward/Reverse button

until the anvil comes a complete stop.

Forward Rotation Operation

The tool is in forward operation if the blue light is not on.

Reverse Rotation Operation

By long press on the F/R switch, users are able to choose

the mode of Reverse operation, either automatic or

manual.

Mode 1: Automatic – Tool returns to Forward operation

automatically after reverse operation.

Mode 2: Manual – Tool needs to be adjusted manually to

return to Forward operation after reverse operation.

How to adjust: Long press on the F/R switch and release it

as seeing the flashing blue light is on. The mode is

transformed successfully

LED Indicator

When the arrow mark is blue, it means the tool is in

the reverse operation.

A green light tells the operator that the preset torque

isreached and the tightening is OK.

A flashing yellow light and five short "beep@ sounds

give an early warning when it is time for recharging.

Instructions manual / BTP

Steps for Torque Adjustment

2. Use the torque adjust tool to turn clockwise to

Red light and one long "Beep" sound

tell the user :

1. The preset torque is not reached

and the screwing fastener must be

performed again.

2. The screwing fastener has been

tightened repeatedly.

A yellow light and one long "beep@

sound mean a battery lock that

indicates the tool can't work and MUST

change the battery pack immediately.

Lift the torque adjustment over. Take the

torque adjust tool and insert it to the quick

change holder and turn until the adjust hole

shows up.

Note: To avoid danger during the adjustment

process, the battery pack must be removed

before adjusting the torque.

increase torque and turn counterclockwise to

decrease torque.