Cyklos GPM 450 SA 사용 설명서 - 페이지 3

{카테고리_이름} Cyklos GPM 450 SA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyklos GPM 450 SA 14 페이지. Semi-automatic creasing and perforating machine

1. INTRODUCTION

We are presenting you with Operating Instructions that contain machine technical data and

instructions necessary for correct setting, machine start-up, operation and maintenance.

Instructions are intended for machine operation as well as for service engineers. People

manipulating, installing and operating the machine should familiarise themselves with the

instructions before they start. We would like to emphasize that service operations can be executed

only by an authorized person with proper qualification. This person should be thoroughly familiar

with control and all functions of the machine. Any repair done without authorization can lead to a

breach of the warranty. We are referring to section 2.2 – Work Safety and Health Protection

providing basic information about safety during work with the machine and an operator's health

protection. Please pay due attention to this section. Be aware that the final responsibility lies with

the individuals working with the machine.

The machine construction complies with the Directive 98/37/EC of the European Parliament and of

the Council. If all the instructions in this document are respected, you will be satisfied with

precision and performance of the machine.

We can assure you the machine received maximum care. Thoroughness of control ensures

machine precision within the scope of the acceptance standards applicable for this machine. We

believe these Operating Instructions will be a valuable guide for you.

2.1

When using GPM 450 SA, all safety rules and procedures as well as all warnings regarding work

safety and health protection listed in this document must be observed. Or otherwise, considering

the bellow listed factors, a serious injury or death of a person, damage or destruction of the

machine, its parts or accessories could occur.

Factors increasing risk:

- Rotating pulleys and moving belts

- Voltage

- Noise made during processing

- Moving parts of the machine and equipment

- Sharp edges created during processing

- Dust created during processing

2.2

This section provides the user with basic information about work safety and health protection of an

operator and all other people who come into contact with the machine.

If the GPM 450 SA is used correctly, it is a very safe machine. However, if used incorrectly, it can

be dangerous. When operating the machine, the operator is responsible for their own personal

Operating Instructions | GPM 450 SA