Cyklos RPM 350 Plus 운영 매뉴얼 - 페이지 6

{카테고리_이름} Cyklos RPM 350 Plus에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyklos RPM 350 Plus 12 페이지. Rotary perforating machine

6.4 Reading of display

Symbol "P" appears, if there is a missing

paper on the feeding table.

Symbols "E-1" (E-2) appear if the upper lid (5) is not closed properly.

Diagnostics

Symbol "blc" appears if rollers are blocked

and the motor is overloaded.

Initial screen of diagnostics.

Appears when RESET button is being held for more than 3 secs.

3 dots on display are shining if:

1) There is no paper loaded on feeding table.

2) Sensor of the paper is not blocked (no paper inside machine).

3) Sensor of motor is blocked by screen placed on

driving pulley.

Left dot shows correct function of sensor, which defines revolutions

of motor. Slowly move the pulley. If everything is ok,

left dot stops shining always when sensor is not blocked by screen.

Middle dot shows correct function of sensor of counter.

To find out if sensor of counter works correctly, outshine it by

piece of paper. If everything ok, the middle dot stops shining.

Once the paper has been removed, the dot starts shining again.

Sensor is placed in the middle between left and middle feeding

wheel table.

ROTARY PERFORATING MACHINE RPM 350 PLUS