3M 8810 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} 3M 8810에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M 8810 2 페이지.
3M 8810에 대해서도 마찬가지입니다: 사용 지침 (3 페이지), 매뉴얼 (2 페이지)

페이지 인쇄

8810 Respirator

Fitting Instructions

Respiratory protection is only effective if it is correctly

selected, fitted and worn throughout the time when the wearer

is exposed to hazards.

3M offers advice on the selection of products and training in

the correct fitting and usage.

For help with selecting the most appropriate forms of PPE and

relevant health and Safety legislation, or for more detailed

product information, please contact the Afrox Customer Service

Centre on 0860 020202

Note: Also available in dispenser boxes.

1. Cup the respirator in

your hand with the

nosepiece at your

fingertips allowing the

headbands to hang freely

below your hand.

3. Pull the top strap over

your head resting it high at

the top back of your head.

Pull the bottom strap over

your head and position it

around the neck below the

ears.

Note - do not use with beards or other facial

hair that may inhibit contact between the face

and the edge of the respirator.

2. Position the respirator

under your chin with the

nosepiece up.

4. Place the fingertips of

both hands at the top of

the metal nosepiece.

Mould the nosepiece to

the shape of your nose by

pushing inward while

moving your fingertips

down both sides of the

nosepiece. Pinching the

nosepiece using one

hand may result in less

effective respirator

performance.

5. The seal of the respirator

on the face should be

fit-checked prior to wearing

in the work area.

a) Cover the front of the

respirator with both hands,

being careful not to disturb

the position of respirator.

b) Exhale sharply.

A positive pressure should

be felt inside the respirator.

If any leakage is detected,

adjust position of respirator

and/or tension of strap.

Retest the seal. Repeat the

procedure until the

respirator is sealed properly.