Dogtra 3500NCP Super-X Series 코드 설정 매뉴얼 - 페이지 4

{카테고리_이름} Dogtra 3500NCP Super-X Series에 대한 코드 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra 3500NCP Super-X Series 4 페이지. Remote controlled dog training collars
Dogtra 3500NCP Super-X Series에 대해서도 마찬가지입니다: 설정 매뉴얼 (6 페이지), 제품 설명서 (14 페이지)

페이지 인쇄

Code setting for your Orange Collar/Receiver:

1) Turn the Transmitter on by

2) Set the Nick/Constant Toggle

3) Place the red dot on the back of

4) Within 5 seconds after releasing

Together

light blinks once every 4 seconds after staying on green for

about a second. Now the setting work is completed.

pushing the ON/OFF Switch

located on the right side then

select the level 0 with the

Intensity Selection Dial.

Switch on the front of the

transmitter on the C position.

the transmitter to the red dot on

the Orange collar/receiver. Hold

the two red dots together for

about 5 seconds or more.

Release them when the green

LED blinks fast on the

collar/receiver.

the transmitter and the receiver,

hold the Black button and the

Orange button on the left side of

the transmitter together for 3

seconds, or until the rapid green

blink resumes to a slower paced

green blink. The LED indicator

Code setting for your newly replaced

3502NCP Super-X Black Collar/Receiver for (Two-Dog)

Once you have received the black collar/receiver that was sent

to you by the Dogtra facility, you need to code set your unit to

control the new Black Collar/Receiver with your Transmitter.

The code setting method is the same as the procedure

introduced on the page 2 Code setting for your Black

Collar/Receiver.

Code setting for your newly replaced

3502NCP Super-X Orange Collar/Receiver for (Two-Dog)

Once you have received the orange collar/receiver that was

sent to you by the Dogtra facility, you need to code set your unit

to control the new Orange Collar/Receiver with your

Transmitter.

The code setting method is the same as the procedure

introduced on the page 4 Code setting for your Orange

Collar/Receiver.