Dogtra CUE 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Dogtra CUE에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra CUE 19 페이지. Remote dog training collar system

7. MULTI DOG DEVICE SELECTION

If you purchase additional receivers, you can select the dog

that you want to give stimulation using dog select button.

1-Dog

2-Dog

10 Level

12 Level 8 Level

12 Level

You can check the selected dog on the LCD screen, and the

transmitter remembers the level set for each receiver, It's

unnecessary to set every single time.

3-Dog

3-Dog syetem

You can add up

to 2 receivers.

8 Level

1. Turn the transmitter on, and set it to following:

C (Continuous) mode, stimulation level at 0.

2. Turn off the receiver you want to pair, and hold its power

button for 6 seconds until the LED starts flashing.

3. Press the Base Stimulation Button on the transmitter to

complete the pairing. The receiver's LED should stay on

for 1 second.

Restart the pairing steps if the LED on the receiver

stays on or flashing for more than 1 second. The

pairing between the devices has timed out or failed.

flicker