Dogtra DUAL DIAL 코드 설정 매뉴얼 - 페이지 3
{카테고리_이름} Dogtra DUAL DIAL에 대한 코드 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra DUAL DIAL 5 페이지.
페이지 인쇄
2-DOG SET UP
Press the middle button to set the transmitter as a 2-dog system.
2
Select
1
Front side:
controls Dog 1
Left side:
controls Dog 2
2
1
The screen will show that both 'Dog 1' and 'Dog 2'
have been set up.
If you want to change the side, please start over by
putting the transmitter in "Setting Mode."
or
1
Select
2
Left side:
controls Dog 1
Front side:
controls Dog 2
1
RECEIVER CODE SETTING
1.
2.
Models with red dot:
Hold the two red dots together until the green LED blinks rapidly on the
receiver and then separate the two devices.
2
Models with on/off button:
Hold down the on/off button on the receiver until the green LED blinks rapidly
on the receiver.
Turn the transmitter on (or leave on after
code setting the transmitter).
Set the Rheostat Dial to 0.
Turn on
Depending on what model you are coding
the transmitter to, you will either place the
red dot on the back of the transmitter to the
red dot on the receiver or hold the on/off
button on the receiver.