Dogtra Edge 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Dogtra Edge에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra Edge 19 페이지. Remote controlled dog training collars
Dogtra Edge에 대해서도 마찬가지입니다: 소유자 매뉴얼 (19 페이지), 제품 설명서 (14 페이지), 소유자 매뉴얼 (20 페이지), 코드 설정 매뉴얼 (2 페이지)

페이지 인쇄

* Caution - The battery wires must

be inside the battery compartment

tucked neatly along the right side

of the battery.

7. Fasten the battery cover and the belt clip back on the transmitter with

the four screws.

* Caution - Do not detach the wire

by pulling from the battery.

* Caution - The orange rubber

gasket is important for the unit

to be waterproof and must be

properly seated in place.

To replace the battery in the receiver/collar,

1. Begin with the receiver/collar turned off.

2. Remove the strap and unscrew the Phillips head screws on the four

corners of the receiver/collar.

* Unscrew the screws with a firm grip, taking extra caution to not strip

the screws.

3. Remove the front case. While holding the battery wire, detach the

wire from the battery connector plug.

4. Holding the battery wire of the new battery, plug the wire in to the

battery connector plug.

5. Check that the battery connector wire is firmly inserted into the plug.

The battery wires must be inside the battery compartment.