Dogtra Edge RT 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Dogtra Edge RT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra Edge RT 15 페이지. Remote controlled dog training collars
Dogtra Edge RT에 대해서도 마찬가지입니다: 설정 매뉴얼 (6 페이지), 제품 설명서 (14 페이지), 소유자 매뉴얼 (17 페이지)
페이지 인쇄
7. The LED indicator
is on and ready for use. The LED indicator will blink on both
the transmitter and the receiver when the transmitter buttons
are pressed.
The LED indicator color indicates the battery life level.
Green = Fully charged, Amber = Medium, Red
charging
If the unit is used while the LED indicator is red, it will shut
down automatically.
8. Charging the battery
1. Lift the rubber-charging cap and plug in the charger.
2. Plug the adapter's power plug in to a standard AC wall outlet.
turn red.
3. When the unit is fully charged, the LED indicator will turn
adapter's power plug from the AC wall outlet and disconnect
the charger from the unit.
4. Place the rubber-charging cap back over the charging port.
15
dirt and debris does not build up in the charging port area. The
unit is waterproof even if the rubber-charging cap is not fully
closed.
Using the EDGE RT as a 2 or 3 Dog System
additional splitter cables as shown above.
Connect 2 splitter cables together to charge all parts of a 2-dog
system, or connect 3 splitter cables together to charge all parts of
a 3-dog system, at the same time.
* Warning
3. Fully charge the unit before storing for one month or longer.
4. Always use Dogtra approved charging adapters.
16