Dogtra RR Deluxe 설정 매뉴얼 - 페이지 2

{카테고리_이름} Dogtra RR Deluxe에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra RR Deluxe 2 페이지. Code setting
Dogtra RR Deluxe에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지), 제품 설명서 (14 페이지), 코드 설정 매뉴얼 (2 페이지)

페이지 인쇄

CODE SETTING GUIDE

Code setting method to pair a transmitter with

receivers

uses code free technology so

that you can match one transmitter up to eight

different receivers. (16 including left and right

ports) Once the code has been set, pressing a button

on the specific selection dial will only activate the

designated receiver. Follow the steps in order to pair

a transmitter with a receiver unit.

1) Turn the selection dial of

handheld transmitter to the

desired number to pair it

with the receiver.(For

example, if you want to

designate a receiver as

your number 2 receiver, set

the selection dial of the

transmitter to number 2.)

2) Hold down the on/off

button of the receiver for 5

seconds or more. Release

them when the green LED

blinks rapidly.

3) Within 5 seconds after

acknowledges the transmitter, the LED on the

receiver should emit a constant green light for

approximately 3 seconds then switch to slow

steady standby blink.

4) Press the duck call or beep sound button on the

transmitter. If the receiver emits sound, the

receiver is successfully coded to the transmitter.

(Repeat the process from step 1, if you have

additional receivers to be coded.)

CODE SETTING GUIDE

releasing the on/off button

of the receiver, hold the

left and right buttons

simultaneously on the

handheld transmitter.

When the receiver

successfully