Dogtra YS300 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Dogtra YS300에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra YS300 12 페이지. No bark collar
Dogtra YS300에 대해서도 마찬가지입니다: 소유자 매뉴얼 (12 페이지), 제품 설명서 (14 페이지), 소유자 매뉴얼 (12 페이지)

페이지 인쇄

TESTING

TESTING YOUR NO BARK COLLAR

1. Turn the

dogtra YS300

OFF & Intensity Dial and select "TEST" Level

so that the arrow on the dial is aligned with the

"test" line.

The LED indicator light will flash 1 second to

indicate that it is on, after 2 seconds it will flash

every 2 seconds. If the dog does not bark over

10 seconds, it will turn to the Sleep mode to

save battery life and the LED will turn off.

on by turning the ON-

2. Test by scratching the rough surface of the test

tool on the collar (as shown in the diagram) using

a fingernail or pen. The collar will emit a

vibration three times. Then repeat the same

process if you want to try it again.

✽

When the No Bark Collar emits a vibration,

a stimulation is not emitted at the same time.

✽

When you set the dial on the TEST Level,

it may be sensitive enough that the No Bark

Collar can be activated easily by a small sound

or tap.

TESTING