3M 8825+ 기술 데이터 시트 - 페이지 4

{카테고리_이름} 3M 8825+에 대한 기술 데이터 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M 8825+ 4 페이지. Particulate respirators

Personal Safety Division | 3M

™

Cleaning Instructions

If the respirator is to be used for more than one shift the face

seal/gasket must be cleaned at the end of each shift using the

3M 105 face seal wipe.

DO NOT immerse product in water.

Store cleaned respirator in clean, airtight container.

Disposal

Contaminated products should be disposed as hazardous

waste in accordance with national regulations.

Marking

R =

Reusable

D =

Meets the clogging requirements

End of Shelf Life. Date format: YYYY/MM/DD

Temperature Range

Maximum Relative Humidity

Name and address of Legal Manufacturer

Dispose of in accordance with local regulations

Important Notice

The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will

be used by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of

the product within its expected application.

All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to

other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user.

Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user

from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the

environment and usage of tools with this product must be observed. The 3M group (which cannot verify or control those elements) would not be

held responsible for the consequences of any violation of these rules which remain external to its decision and control.

Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding

any other warranty or compensation.

Please recycle. Printed in the UK. 3M is a trademark of the

Distributed by Fisher Scientiﬁc. Contact us today:

Particulate Respirators 8825+ and 8835+

™

Approvals

The Certificate and Declaration of Conformity available at the

following website: www.3M.com\Respiratory\certs

Made in UK, in an ISO 9001:2008, ISO 14001:2004 and

OHSAS 18001:2007 certified plant.