Dogtra Edge RT 소유자 매뉴얼 - 페이지 11
{카테고리_이름} Dogtra Edge RT에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra Edge RT 17 페이지. Remote controlled dog training collars
Dogtra Edge RT에 대해서도 마찬가지입니다: 설정 매뉴얼 (6 페이지), 소유자 매뉴얼 (15 페이지), 제품 설명서 (14 페이지)
페이지 인쇄
* Caution: Tighten until firmly in place. Be careful not to
over tighten.
To shorten the contact points back to the standard 5/8",
start with the adjustment tool with the side marked 3/4",
remove the contact point extensions, and tighten the
contact points with the adjustment tool with the side
marked 5/8".
18
10. Code Setting
To set the coding for the Dogtra EDGE RT transmitter to
an existing receiver/collar, or an Additional receiver/collar,
follow the steps below.
1. Set the stimulation dial to
level 1, and select between
dog 1, 2, and 3 with the dog
selector dial on the handheld
transmitter.
2. With the receiver/collar
turned off, hold the red dot
on the front of the
transmitter to the red dot
on the receiver/collar for
about 5 seconds.
3. IMPORTANT! Place the
receiver/collar aside when
the LED indicator rapidly
blinks green on the receiver/
collar. Take caution not to
touch the contact points
on the receiver/collar during
step 3 or you may receive
an electric stimulation.
19