Clockaudio CUB-33 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} Clockaudio CUB-33에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clockaudio CUB-33 15 페이지. Conference usb microphone

USE THE VU MODE TO SET GAIN

With the Button Mode set to VU ON, the LEDs will

appear green when a signal is present, yellow when

a signal is near clipping, and red when the signal is

clipping.

In VU mode, speak into the microphone(s) at a slightly

elevated speech level. Set the microphone preamp gain so the signal is

mostly green with infrequent peaks into yellow during louder speech testing.

You do not want to see any Red.

Once the gain is set properly, exit the setup menu.

VERIFY STREAMING AND GAIN LEVELS VIA USB

After you have adjusted the gain on the CUB-33, verify that it is passing the

signal to a Windows or Mac PC. Connect the CUB-33 to a Windows or Mac

PC.

Launch Windows Sound panel (on a Windows PC) or Sound from System

Preferences (on a Mac computer). Verify that the input level is satisfactory.