Aseptico 6520-01-600-8241 운영 및 유지보수 매뉴얼 - 페이지 4
{카테고리_이름} Aseptico 6520-01-600-8241에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aseptico 6520-01-600-8241 20 페이지.
페이지 인쇄
To prevent injury to people and damage to property, please heed relevant warnings and
remarks. They are marked as follows:
WARNING: Serious injury or death may result if ignored.
CAUTION: Damage to property or the environment may result if ignored.
NOTE:
SAFETY PRECAUTIONS:
Aseptico accepts no liability for direct or consequential injury or damage resulting from improper
use, arising in particular through the non-observance of the operating instructions, or improper
preparation and maintenance of this product.
CAUTION:
Use for intended purposes only. Failure to observe the operating instructions may
result in the patient or user suffering serious injury or the product being damaged,
possibly beyond repair. Before using this product, make sure that you have studied
and understood the operating instructions.
CAUTION:
Use of other Lamp filters or accessories from third-party manufacturers is the sole
responsibility of the user.
CAUTION:
All repairs to the LED Assembly, Boom Arm, and Power Supply are to be performed
by authorized Aseptico service personnel only.
WARNING:
Do not install where there is a risk of an explosion. The ALU-40LED-CF is not
intended for operation in the presence of flammable anesthetics or gases.
CAUTION:
Connect AC power supply mains cable to a properly grounded outlet only.
CAUTION:
The ALU-40LED-CF Lamp is sensitive to shock and may be damaged if dropped or
impacted against a hard surface.
WARNING:
Do not disassemble or alter the Lamp's LED, Boom Arm, or Power Supply
subassemblies.
CAUTION:
It is recommended to always have the patient wear darkened eyewear during
dental procedures. Avoid looking directly into the LED when Lamp is turned on.
CAUTION:
If the Lens Cover and/or acrylic Fresnel Lens on the Lamp Head needs to be
cleaned, use reagent-grade isopropyl alcohol, professional lens cleaning solution, or
de-ionized water with a small amount of dish soap - do not use other solvents as
they might adversely react with the Lens materials.
2
Important additional information and hints.